Kverneland 97150 C Plus

• Raking width can be continuously varied on the move between 9.50m and 15.00m.
• Raking width can be matched to the density of crop to obtain an evenly shaped and equally wide swath over the full length.
• The two outer rotors can be adjusted individually.
• You can independently steer an outside rotor around an obstacle such as a pole or tree without having to change travel direction with the complete machine.

• The 2-pt headstock allows a turning angle up to 80° and the steered wheel axles ensure the 97150 C has unequalled manoeuvrability.
• Despite a total length of 9 m, even narrow gateways or approach lanes to fields are easily negotiated.
• Hydraulic or pneumatic breaks allow  97150 C to reach high transport speeds, minimizing time spent going from field to field.
• During transport the height of the machines  is below 4m, without removing the tines. Transport width with detached tine arms is only 3.45m.
• Conversion from transport to working position is very fast, and is carried out from the tractor cab.

Hydraulic ground pressure control means constant and adjustable pressure on the rotors regardless of their position on the carrier frame.

Free mobility in three planes combined with six steered twin wheels per rotor give each rake head perfect ground-following ability for the cleanest possible raking performance.

Each rotor can be independently set for height by using the hydraulic system.