Kverneland 85140 C
Easy handling – minimum maintenance
High capacity carrier frame tedder
Highlights
Outer rotors folded on carrier frame for transport Carrier frame limits the tractor size needed Hydraulically adjustable border tedding 7 tines per rotor for optimised for pick-up Solid box type frame with two U-sectionsDescription
This 13.3m tedder offers a new dimension in efficiency and stability. 10 rotors with 7 tine arms each can easily spread four 3.00m swaths. 85140 C is very easy to use. All operations are run hydraulically, and can be controlled from the tractor cab. The tedder comes with a hydraulic adjustment for border tedding, to prevent loss of grass due to ditches or fences. Despite its size, the tedder is very easy to run. 85140 C is supplied with transport carrier as standard, making it possible to operate the machine in combination with low horsepower tractors.
Highlights
- Unique transport solution with outer rotors folded onto the carrier frame.
- The carrier frame design limits the tractor size needed.
- Hydraulically adjustable border tedding via three outer, right hand side rotors.
- 7 tine arms per rotor for optimal pick-up and distribution of material.
- Box type frame composed of two U-sections for extremely solid construction.
Features
- The ProLine gearbox is a strong and reliable construction, and is not fitted to the mainframe.
- Shock-protected: The enclosed system is not affected by chassis or tine arm vibrations.
- Constant lubrication: Enclosed and oil-immersed, the gearbox components enjoy extended longevity over systems that require manual lubrication.
- Reduced maintenance: There is no need for daily lubrication.
- Environmental protection: No lubrication means no leakage - hence higher-quality forage.
- No corrosion: No ingress of dust and water, not even during pressure washing.
- The Super-C tine can be locked in three positions to customize the pickup angle to different conditions. For heavy silages the angle can be set more aggressive and for fragile crop a gentler angle can be chosen.
- Made from flat steel, the tine arms form a very compact unit with the rotor plate and utilize the force of the rotor plate for higher durability of the time arm. This makes a Kverneland tine arm by far more resistant to any type of load.
- Super-C tine with symmetric spring tines ensures efficient pick-up and turning of the crop. Tines with same lengths has the added advantage that load is spread evenly on both tines, providing longer life time.
- Made from 10mm shot-peened spring steel and a coil diameter of 80mm, Super-C tines add up to the most durable and flexible tine in the market.
- The box type frame of the Kverneland 8000 series is an extremely solid construction. It is composed of two U-sections fitted into each other and securely welded together. The frame is totally enclosed at the top for maximum strength.
- All tedders have greasable pivoting points with an extra large diameter, making it a very strong and reliable construction.
- Made from flat steel, the tine arms form a very compact unit with the rotor plate. This makes the tedders by far more resistant to any type of load.
- High-quality forage allows the optimum spreading angle to be achieved according to crop conditions, helping you to produce high quality forage.
- Setting the rotors to the right spreading angle will considerably improve the spreading action, and speed up the drying process.
- The mower swaths are neatly lifted by the tines and evenly spread over the full width.
- Tines glide in a more uniform frequency over the stubble, so the risk of dirt being lifted by the tines is minimized.
To increase productivity, all mounted tedders are Standard equipped with a mechanical border tedding device.
All carried tedders (8590 C, 85112 C, 85140 C) have standard hydraulic solution for border tedding.
A marker cleverly shows the position of the axle.
- It only takes a few seconds to place the tedder in the right position.
- For 85140 C border tedding is set by moving the outer arm at the correct angle.
Technical specifications
Technical specifications
Download brochureModel ProLine | 85140 C | |
---|---|---|
Working width (m/ft) | 13.30 / (43’8”) | |
Number of rotors | 10 | |
Number of tines/rotor | 7 | |
Transport width (m/ft) | 2.98 / (9’9”) | |
Transport length (m/ft) | 6.20 / (20’4”) | |
Storage height (m/ft) | 3.35 / (10’12”) | |
Capacity theor. (ha/h) | 10.7 |
Technical specifications
Technical specifications
Download brochureWorking width |
Rotors/Tines |
Weight |
|
85140 C |
13.30m |
10/7 |
2300kg |