Self propelled sprayer range offering tank capacities of 4.250, 5.200 or 6.150 litres. HSA aluminium booms from 24 up to 30m and HSS steel booms from 24 up to 40m are possible.
Quality, Productivity and Performance
The iXdrive S6 comes in two models, the iXdrive HP as a basic model and the iXdrive HP ECODRIVE as the top model, with new features like increased power Stage V engine. The iXdrive is designed to spray the right amount, in the right place, at the right time. This is made possible by iXclean Pro, automatic valve management and iXflow-E high pressure circulation system with individual nozzle control, which are equipped standard on the iXdrive. The EasySet control panel offers a clean and convenient workspace with all needed components directly at hand. The spraying technology is easy to operate from the cab with the Kverneland iXspray technology on the standard equipped IsoMatch Tellus PRO Terminal and the IsoMatch Grip for easy, simple, fingertip control.
The Advantages:
Technical Specifications
iXdrive S6 | |||
Nominal tank capacity (l) | 4.250 | 5.200 | 6150 |
Maximum tank capacity (l) | 4.500 | 5.500 | 6.500 |
Clean water tank (l) | 520 | ||
Ground clearance (m) | 1.30 / 1.50 / 1.70 | 1.30 / 1.50 | |
Track width (m) | 1.80 - 2.25 / 2.25 - 2.95 | ||
Spray booms (m) | HSA 24-30 (2 part folding) / HSS 24-30 (2 part folding) / HSS 32-40 (3 part folding | ||
Diesel engine | John Deere PowerTech 250 HP Stage V optional 300 HP Stage V or 250HP Stage II | ||
iXclean Pro, iXflow-E | Standard |
HSS 24-27-28-30-32-33-34-36-38-39-40m Compact Side Folding Steel Booms
HSA 24-27-28-30m High Tech Side Folding Aluminium Booms
iXflow-E
Boom Guide Pro
Boom Guide ProActive
Boom Guide 5 Sensor Extension
EasySet control panel.
iXclean Pro
Pump with unique service position
iXspray
Wheel Axles
Adjustable Track Width
The iXdrive S6 is equipped as standard with a HP (High Performance) drive line. The sophisticated hydraulic setup results in a more efficient use of the available power.
The standard HP model has a 250hp diesel engine and a hydraulic drive line set up for maximum and efficient use of the available power. The hydraulic system provides a step less speed variation reducing engine RPM when possible resulting in optimal efficiency and comfort. The engine is a John Deere 6 cylinder 250hp single turbo with European Stage V emission as standard. Optional available are a 250hp Tier 2 and 300hp Stage V engine.
Easy Operation
Continuous 4-wheel drive
Reliable wheel motors
Integrated brakes
The HP-ECODRIVE model is the top level offering automatic engine RPM which means maximal control.
The HP-ECODRIVE model is the top level drive line with standard 300hp stage V engine resulting in a super comfortable 1350 RPM engine at 40km/h road transport. With HP-ECODRIVE the engine RPM will automatically decrease when possible and increase when necessary. This obvious fuel savings result in maximum cost efficiency and comfort for the driver.
Easy Operation
Continuous 4-wheel drive
Reliable wheel motors
Integrated brakes
Only spray when it is needed
Increase the environmental protection by only spray when it is needed with the new SpotSpray application within the iXspray software on the IsoMatch Tellus terminal in combination with the Kverneland sprayer !
Optimal Crop Protection
The SpotSpray application is based on a predefined prescription map with zero application rates. These prescription maps can be made in a similar way as the Variable Rate Application (VRA) prescription maps, in combination the SpotSpray application the sprayer shuts on and off. This is done based on the predefined sections in the control terminal and can even be done with normal section valves on the sprayer. Only designated spots are sprayed, which is particularly helpful when targeting weed spots, thistles, wet areas, non-germinated areas and areas with soil problems.
Another benefit is that based on the area of the spots in the VRA map, it is easy to see exactly how much spray liquid is required in the sprayer. Capacity is also increased as more hectares or fields can be covered with one tank of spray liquid.
With a relatively small investment in the SpotSpray license on the IsoMatch Tellus terminal, the return on investment is high, due to saving time and money. With this, spot spraying becomes accessible for all famers and contractors.
With SpotSpray costs can be saved by reducing the spray liquid to be used and preserve healthy crop from unnecessary treatment. This also means less crop damage.